Comet Light Weight Couple Pumpset - 5HP
Vertical, Compression ignition, 4 stroke cycle, water cooled diesel engine. InquiryType : Vertical, Compression Ignition, 4 Stroke cycle, water cooled diesel engine.
Injection : Direct injection as aluminum alloy piston is fitted and due to long and three holes nozzle consumption of fuel is less and helps engine to start and run smoothly.
Fuel systems : On the basis of good quality main paper element and by help of centrifugal force fuel easily reaches to fuel pump.
Lubrication : By help of plunger pump centrifugal force the large end bearing get easily lubricated. So taper roller bearing did not require separate lubrication and all other required parts get lubricated automatically. The oil is filtered by the help of sump suction strainer.
Governing : Good quality and accurate centrifugal type governor is fitted on camshaft gear wheel and same is fitted as per class B1 and meeting the parameter of IS 11170.
Cooling : Automatic cooling through the water running in the pump.
Rotation : The fly wheel turns clock wise from the front view.
Starting : Manual start, built to start easily by just rotating the starting handle.
Exhaust sys. : Standard silencer is fitted for superior silencing.
Air cleaner : For better performance oil bath type air cleaner is fitted.
Accessories : Starting handle, exhaust silencer, air cleaner, spanned set and screw driver.
Casting : Design of volute / Split type casing is made such that speed gets automatically & helps to suction water forcibly & in better flow. Casing is made from high graded grey cast iron.
Impeller : Impeller is also made from high graded grey cast iron and is accurately machined from outside. Inside passage is made from shell core (Dynamically Balanced).
5 HP 1500 RPM
No. of Cylinder | 1 |
---|---|
Bearing Type | TBR |
Power (KW /BHP) | 3.7 / 5 |
RPM | 1500 |
Bro X Stroke (mm) | 85 X 80 |
Cubic Capacity (Ltr.) | 0.454 |
Compression Ratio | 18:1 |
Fuel (at full load) (g/kwh) | 250 |
Oil Seal Type Oil Bath Double Bearing Pump Design | |
Pump Size (mm) | 80 X 65 |
Duty Point Head (M) | 12 |
Discharge (Lps) | 12.6 |
Head Range (M) | 9.6 - 13.2 |
Efficiency (%) | 68 |
Lub. Oil Sump Capacity (Ltr) | 1.75 |
Lub. Oil Consumption (cc/hr) | 16 |
Capacity of Fuel Tank (Ltrs.) | 7.5 |
Weight (Pumpset only)(Kgs) | 124 |
5 HP 2200 RPM
No. of Cylinder | 1 |
---|---|
Bearing Type | TBR |
Power (KW /BHP) | 3.7 / 5 |
RPM | 2200 |
Bro X Stroke (mm) | 76 X 76 |
Cubic Capacity (Ltr.) | 0.345 |
Compression Ratio | 18:1 |
Fuel (at full load) (g/kwh) | 250 |
Oil Seal Type Oil Bath Double Bearing Pump Design | |
Pump Size (mm) | 80 X 65 |
Duty Point Head (M) | 12 |
Discharge (Lps) | 12.6 |
Head Range (M) | 9.6 - 13.2 |
Efficiency (%) | 68 |
Lub. Oil Sump Capacity (Ltr) | 1.75 |
Lub. Oil Consumption (cc/hr) | 16 |
Capacity of Fuel Tank (Ltrs.) | 7.5 |
Weight (Pumpset only)(Kgs) | 122 |